Product Detail
Chamfer Mill
Carbide chamfer mills for ferrous edge-break callouts after drill/ream—not fastener seats.
Deburr angles on steel
0.2×45° edge breaks after drill and ream
Most ferrous prints just want a clean edge break—not a screw-head seat. Chamfer mills handle those deburr angles on steel and stainless after holemaking. Fastener seats use the countersink URL; aluminum hole mouths with PCD use PCD chamfer/spotface.
Aka: chamfer cutter—same deburr-angle intent.
Typical edge-break callouts
- 0.1–0.5 mm × 45° (or similar) on hole mouths
- Plate edge breaks without fastener symbols
- Pocket lip deburr after milling
Deburr RFQ fields
- Material grade
- Angle and land size
- Which edges (list them)
- Burr photos if replacing a failing tool
Chamfer mill FAQ
Print shows a screw countersink symbol?
Use countersink—different acceptance criteria.
Aluminum hole mouths with PCD?
Angle and land on the print?
Deburr RFQs need edge-break dimensions—not screw standards.