Product Detail
PCD Chamfer and Spotface Tools for Aluminum Hole Edges
PCD chamfer/spotface for aluminum hole mouths and clamp pads after drill/ream.
Aluminum hole mouths · PCD
Spotface clamps and entry chamfers on abrasive Al holes
After aluminum drill/ream, hole mouths still need PCD-friendly chamfers or spotfaces so clamps seat and burrs stay gone. This is hole-edge finishing on Al—not a steel deburr mill and not a screw-seat countersink catalog.
Jobs on this URL
- Entry/exit chamfer on Al holes post drill or ream
- Spotface / clamp pads around Al holes
- Discuss combo with drill/ream inside the RFQ if one setup is required
Al hole-edge intake
- Alloy; finished hole Ø
- Chamfer size OR spotface Ø × depth
- Clamp flatness if spotface
- Carbide edge wear notes on the incumbent
Not this URL
- Steel 45° deburr → chamfer mill
- Screw head seat → countersink
- Bore size only → PCD reamer
Al edge FAQ
Is this a countersink SKU list?
No—Al hole-edge PCD concepts with drawing-based RFQ.
Life percentages?
Not published; quote from process inputs.
Hole Ø and edge size ready?
Al PCD edge RFQs start from hole geometry after drill/ream.